Odour trap | 50 mm |
Flow rate | 48,6 l/min |
Overflow flow rate | 33,6 l/min |
Resistance of odour trap against the pressure | 588 Pa |
Thermal resistance | 95 ˚C |
Product details
- For filling the bath by overflow
- To drain the water from the bath to the waste
- For standard size bathtubs
- For bathtubs with drain outlet Ø52 mm
Application
- Bath overflow filler, waste and trap system
- Aerator Neoperl – easy access and exchange
- Control shaft made of stainless steel
- Water does not flow down on the side of the bathtub and does not leave marks
- Space-saving design in the bathtub – only control knob visible
- Easy installation with three stainless steel screws
- Wet odour trap with swivel elbow
- Closing waste by pop-up mechanism
- Overflow flexi pipe
- Side G1/2" fitting for filling of pre-mixed water
- The length of the bathtub trap 57 cm
Specifications
-
Norms
EN 274
Quantity (package) | 12 pcs |
Quantity (pallet) | 192 pcs |
Dimensions (piece) | 380×95×210 mm |
Dimensions (package) | 595×435×395 mm |
Weight (piece) | 1,1804 kg |
Weight (package) | 14,1648 kg |
Weight (pallet) | 246,6368 kg |
- Waste and trap body with overflow
- Chrome-plated metal control knob
- Chrome-plated metal plug
- Chrome-plated brass outlet grid
- Odour trap of polypropylene, thermally and chemically resistant, longitudinally welded
- Assembly kit
- Profiled seal
Scope of supply
P064-ND | Plug metal large (A564KM1, A565KM1) |
P069-ND | Aerator set |
P079-ND | Aerator set long |
P084-ND | Control knob bath trap metal A564 |
S0003-ND | Nut G1 1\/4" |
S0004-ND | Nut G1 1\/2" |
S0009-ND | Conical sealing 44×39×5 |
S0069-ND | Lever A51 |
S0079-ND | Nut |
S0082-ND | Bathtub plug sealing |
S0084-ND | O-ring 10×2 |
S0085-ND | Sealing 70×50×6 |
S0100-ND | Shaped sealing |
S0160-ND | Screw 33 mm long |
S0237-ND | Grid A55 metal |
S0316-ND | Screw 40 mm long |
S0335-ND | Sealing A55 |
S0788-ND | Overflow sealing A564 |