Shower drain with an edge for perforated grids and adjustable vertical flange to the wall, straight outlet
APZ1004 Flexible
Product details
Odour trap | 50 mm |
Flow rate | 60 – 68,8 l/min |
Resistance of odour trap against the pressure | 590 Pa |
Waste pipe diameter | 50 mm |
Minimum thickness of concrete | 85 mm |
Total installation height | 100 – 158 mm |
Movable flange range | 10 – 15 mm |
Load class K3 | 300 kg |
- For indoor use
- For wooden and prefabricated buildings
- For drainage of floor-level showers
- For installation directly to the wall
- For perforated stainless steel grids
- For wheelchair access
Application
- Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
- Adjustable vertical insulating collar for tiles with a thickness of 6–12 mm
- Installation height from 85 mm
- Adjustable height
- Trap firmly connected to the drain – 100% waterproofing
- Self-adhesive tape for quality waterproofing
- Mechanically cleanable trap up to the waste pipe
- The collar and trap are protected by foil, and the channel itself by a polystyrene insert
- The high flow rate is achieved due to the double compartment trap system
- Facilitates the inclination of the floor
- Better and safer transition of the insulation from the floor to the wall
- Possibility to buy a combined odour trap
- 25 years guarantee
- Material of shower drain: stainless steel 2 mm, AISI 304, DIN 1.4301, EN1253-1
- Trap material: polypropylene
Specifications
-
Norms
EN 1253
Quantity (package) | 8 pcs |
Quantity (pallet) | 24 pcs |
Dimensions (piece) | 1120×160×205 mm |
Weight (piece) | 5,1421 kg |
Weight (package) | 41,1368 kg |
Weight (pallet) | 143,4104 kg |
- The shower drain is assembled with the odour trap
- Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
- Self-adhesive waterproofing tape
- Protective foil covering for the drain edges and odour trap
- Protective film for trap inlet
- Installation trough cover - polystyrene
Scope of supply
K0569-ND | Washer for APZ4 |
K0629-ND | Eccentric washer |
K0631-ND | Washer shortened left |
K0633-ND | Washer shortened right |
S0528-ND | Odour trap for shower drains |
S0529-ND | Strainer SPZ |
S0536-ND | O-ring 75×2,5 |