Product details
Odour trap | 28 mm |
Flow rate | 44 l/min |
Resistance of odour trap against the pressure | 575 Pa |
Waste pipe diameter | 40 mm |
Minimum thickness of concrete | 65 mm |
Total installation height | 80 – 106 mm |
Load class K3 | 300 kg |
- For indoor use
- For wooden and prefabricated buildings
- For drainage of floor-level showers
- For installation into open spaces or near the wall of the shower area
- For full grids, grid FLOOR for embedding tiles and prismatic grid GAP
- For wheelchair access
- For sites with limited floor height
Application
- Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
- For inserting full grids – stainless steel, tempered glass, synthetic stone, grid for embedding tiles and prismatic grid
- Installation height from 65 mm
- Adjustable height
- Trap firmly connected to the drain – 100% waterproofing
- Self-adhesive tape for quality waterproofing
- Mechanically cleanable trap up to the waste pipe
- The collar and trap are protected by foil, and the channel itself by a polystyrene insert
- The high flow rate is achieved due to the double compartment trap system
- 25 years guarantee
- Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
- Trap material: polypropylene
Specifications
Quantity (package) | 9 pcs |
Quantity (pallet) | 144 pcs |
Dimensions (piece) | 385×130×175 mm |
Weight (piece) | 1,9704 kg |
Weight (package) | 17,7336 kg |
Weight (pallet) | 303,7376 kg |
- The shower drain is assembled with the odour trap
- Fixation set: screws Ø6×50 – 2 pcs, dowels Ø10 – 2 pcs
- Self-adhesive waterproofing tape
- Protective foil covering for the drain edges and odour trap
- Protective film for trap inlet
- Installation trough cover - polystyrene
Scope of supply
S0529-ND | Strainer SPZ |
S0536-ND | O-ring 75×2,5 |
S0663-ND | Odour trap SPZ low |
SPZ08-ND | Trap for shower drain bottom outlet, low |