Product details
Odour trap | 50 mm |
Flow rate | 60 – 68,8 l/min |
Resistance of odour trap against the pressure | 982 Pa |
Waste pipe diameter | 50 mm |
Minimum thickness of concrete | 100 mm |
Total installation height | 110 – 170 mm |
Load class K3 | 300 kg |
- For indoor use
- For drainage of floor-level showers
- For installation in the corner of the shower enclosure
- For massive perforated stainless steel grids
- For wheelchair access
Application
- Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
- Building height 100 mm
- The vertical flange allows for simple installation and perfect wall isolation
- Adjustable height
- Mechanically cleanable trap up to the waste pipe
- Trap firmly connected to the drain – 100% waterproofing
- Self-adhesive tape for quality waterproofing
- The collar and trap are protected by foil, and the channel itself by a polystyrene insert
- The high flow rate is achieved due to the double compartment trap system
- Better and safer transition of the insulation from the floor to the wall
- Possibility to buy a combined odour trap
- 25 years guarantee
- Material of drainage channel: stainless steel AISI 304, DIN 1.4301
- Trap material: polypropylene
Specifications
-
Norms
EN 1253
Quantity (package) | 4 pcs |
Quantity (pallet) | 64 pcs |
Dimensions (piece) | 490×125×330 mm |
Dimensions (package) | 595×395×435 mm |
Weight (piece) | 3,144 kg |
Weight (package) | 12,576 kg |
Weight (pallet) | 221,216 kg |
- The shower drain is assembled with the odour trap
- Fixation set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4,2×38 – 4 pcs, dowel Ø8 – 4 pcs
- Self-adhesive waterproofing tape
- The collar and the odour trap inlet are covered by the protective foil
- Installation channel cover
- Fixation set for anchoring adjustable feet: screw M6×12 – 3 pcs
Scope of supply
S0528-ND | Odour trap for shower drains |
S0529-ND | Strainer SPZ |
S0536-ND | O-ring 75×2,5 |
SPZ01-ND | Trap for shower drain |
Z0108-ND | Shower drain hook, metal |