Waste system for installation in walls, cover stainless steel-matt

APZ5 SPA-SHADE

Product details

Odour trap	50 mm
Flow rate	60 – 68,8 l/min
Resistance of odour trap against the pressure	982 Pa
Waste pipe diameter	50 mm
Total installation height	165 – 220 mm
Minimum thickness of concrete	100 mm
Installation depth	64 mm
Cover width	60 mm

For indoor use
Suitable for areas with movement of large number of people – swimming pools, spa, wellness center
For installation into the wall
For wheelchair access

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Installation depth 64 mm
Water flows into the drain only between the edge of the floor tiles and the cover of the drain system
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
Easily removable cover – stainless steel matt
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Possibility to order with LED backlight
The system is placed outside the area of mechanical stress
Possibility to buy a combined odour trap
25 years guarantee
Material of drainage channel: stainless steel AISI 304, DIN 1.4301
Trap material: polypropylene

The shower drain is assembled with the odour trap
Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
Self-adhesive waterproofing tape
The collar and the odour trap inlet are covered by the protective foil
Installation channel cover
Stainless steel design grid SHADE matt
Fixing hardware for anchoring the adjustable legs: screw M6×12 – 2 pcs

File Name	Size	Action
APZ5 SPA-SHADE - CAD drawing.dwg	275.88 kB	Download
APZ5 SPA-SHADE - CAD drawing.dxf	814.66 kB	Download
APZ5 SPA-SHADE - Installation instructions.pdf	1.23 MB	Download
APZ5 SPA-SHADE - Certificate.pdf	334.96 kB	Download
APZ5 SPA-SHADE - Declaration of conformity.pdf	190.67 kB	Download