Pre-wall installation system ECOLOGY for dry build up (especially for renovation of concrete panel housing units)
AM102/1120E Jádromodul
Product details
| Water connection from the back or top via mounting holes | G1/2 " |
| Functional range of water pressure | 0,05 – 1,6 MPa |
| Recommended range of water pressure | 0,3 – 0,5 MPa |
| Big flush | 3,5 – 6 l |
| Small flush | 2 – 4 l |
| Factory setting of large flush | 4 l |
| Factory setting of small flush | 2 l |
| Hygienic reserve | 2 l |
| Water volume in the cistern | 6 l |
| Load test | 400 kg |
- For wall-hung WC with flushing volume of 2/4 l
- For the reconstruction of apartment units
- For installation between two walls
- For installation into wooden structures
- For floor thickness 0–200 mm
- For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
Application
- Dispenser for WC cistern tablets included
- Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
- Visible marks for both leveling and the centerline
- Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
- Angle valve with the ability to connect to the Mepla piping system
- The weight load is transferred to the side walls by the spacer bar that is adjustable in the range 800-1100 mm
- The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
- The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
- Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
- Cistern hinges made of two-component material insulate the transmission of vibrations from buildings
- Dual flush independently adjustable with hygienic reserve
- Water-saving flushing: 2 l small flush, 4 l large flush
- Suitable for installation of remote or sensor flushing
- Compatible with all ALCA flush plates
- The cistern is made of one piece, thus ensuring 100% impermeability
- Water supply from the rear/top
- Maintenance work without using any tools
- The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
- Installation depth adjustable from 20–95 mm
- Installation depth 125 mm
- Frame material: powder-coated metal
Specifications
-
Norms
EN 14124,EN 14055
| Quantity (package) | 1 pc |
| Quantity (pallet) | 15 pcs |
| Dimensions (piece) | 1130×145×520 mm |
| Dimensions (package) | 1130×520×145 mm |
| Weight (piece) | 16,2582 kg |
| Weight (package) | 16,2582 kg |
| Weight (pallet) | 263,873 kg |
- Cistern with fill and flush valve
- Self-supporting frame with spacer bar for anchoring between walls 800–1100 mm
- Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
- Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
- Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
- Elbow waste connector HT 90/90 polyethylene, PE-HD
- Waste reduction HT 90/110 polyethylene, PE-HD
- Inlet seal, PP outlet, wrapping seal
- Drainage seal, PP connector, connector seal
- End-caps set for protecting the connecting holes during installation of the system
- The 2 piece cover of the service opening is simply adjustable
- Set for inserting toilet tablets
Scope of supply
| M0005-ND | Water supply ring A100 |
| M0017C-ND | Inlet fill valve bracket |
| M0021-ND | Inlet sealing (WC systems) |
| M0023-ND | Wrapping seal 45×58×25 (WC systems) |
| M0026-ND | Waste sealing (WC systems) |
| M0028-ND | Coupler sealing (WC systems) |
| M0043B-ND | Inner board for WC systems |
| M0080-ND | Sleeve cover for WC systems |
| M0243-ND | Nut for angle valve bracket |
| M903-ND | Threaded rods + accessories |
| M954-ND | Mechanism complete for WC systems |
| M956-ND | Sliding waste pipe holder for WC systems |
| M959-ND | Set for exchange of inlet fill valve |
| MN0091-ND | Frame sleeve for WC systems |
| MN0092C-ND | Frame for WC system sleeve |
| MN0115-ND | Pipe with O-ring for WC systems |
Downloads
| File Name | Size | Action | |
 |
AM102/1120E Jádromodul - CAD drawing.dwg | 1.19 MB |
Download
|
|
AM102/1120E Jádromodul - CAD drawing.dxf | 3.59 MB |
Download
|
|
AM102/1120E Jádromodul - Installation instructions.pdf | 9.35 MB |
Download
|
|
AM102/1120E Jádromodul - Certificate.pdf | 736.59 kB |
Download
|
|
AM102/1120E Jádromodul - Declaration of performance.pdf | 140.23 kB |
Download
|
|
AM102/1120E Jádromodul - Service Instructions for Alca Concealed Cistern.pdf | 8.65 MB |
Download
|
| Product code | EAN | Technical sheet | ||
|---|---|---|---|---|
| AM102/1120E | 8595580550530 |  |
Installation AM102
