Pre-wall installation system for toilets with bidet function

AM120/1120

Product details

Water connection from the back or top via mounting holes	G1/2 "
Functional range of water pressure	0,05 – 1,0 MPa
Recommended range of water pressure	0,3 – 0,5 MPa
Big flush	6 – 9 l
Small flush	2,5 – 3,5 l
Factory setting of large flush	6 l
Factory setting of small flush	3 l
Hygienic reserve	3 l
Water volume in the cistern	9 l
Load test	400 kg

For mounting in front of a support wall or in to a plasterboard construction
For floor thickness 0–200 mm
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
Toilet with bidet function

Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
Visible marks for both leveling and the centerline
Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Preparation for connecting water from WC cistern to bidet
Dual flush independently adjustable with hygienic reserve
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear/top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Installation depth adjustable from 20–95 mm
Installation depth 125 mm
Frame material: powder-coated metal
Preparation for connecting electricity to bidet ceramics
Cistern hinges made of two-component material insulate the transmission of vibrations from buildings

Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Elbow waste connector HT 90/90 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Eccentric reduction HT 90/110 polyethylene, PE-HD
Set for inserting toilet tablets
Corrugated flexible pipe with ends for connection to the bidet

P196-ND

Nutt + fuse AM120

File Name	Size	Action
AM120/1120 - CAD drawing.dwg	636.91 kB	Download
AM120/1120 - CAD drawing.dxf	2.36 MB	Download
AM120/1120 - Installation instructions.pdf	10.57 MB	Download
AM120/1120 - Certificate.pdf	290.83 kB	Download
AM120/1120 - Declaration of performance.pdf	252.1 kB	Download
AM120/1120 - Service Instructions for Alca Concealed Cistern.pdf	8.65 MB	Download