Pre-wall installation system for dry build up (plasterboard) with top or front actuation

AM118/850 Sádromodul

Product details

Water connection from the back or top via mounting holes	G1/2 "
Functional range of water pressure	0,05 – 1,6 MPa
Recommended range of water pressure	0,3 – 0,5 MPa
Big flush	6 – 9 l
Small flush	2,5 – 3,5 l
Factory setting of large flush	6 l
Factory setting of small flush	3 l
Hygienic reserve	3 l
Water volume in the cistern	9 l
Load test	400 kg

For wall-hung WC
For mounting in front of a support wall or in to a plasterboard construction
For floor thickness 0–200 mm
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

Dispenser for WC cistern tablets included
Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Possibility of built-in remote flushing
Compatible with all ALCA flush plates except for sensor flush plates,STRIPE and NIGHT LIGHT
Pre-wall installation system with top or front actuation
Maintenance work without using any tools
Water supply from the rear/top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Installation depth adjustable from 20–95 mm
Installation depth 170 mm
Frame material: powder-coated metal

Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Elbow waste connector HT 90/90 polyethylene, PE-HD
Waste reduction HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Set for inserting toilet tablets

M0017C-ND	Inlet fill valve bracket
M0021-ND	Inlet sealing (WC systems)
M0023-ND	Wrapping seal 45×58×25 (WC systems)
M0026-ND	Waste sealing (WC systems)
M0028-ND	Coupler sealing (WC systems)
M0043B-ND	Inner board for WC systems
M0080-ND	Sleeve cover for WC systems
M0243-ND	Nut for angle valve bracket
M0603-ND	Cuff
M903-ND	Threaded rods + accessories
M916-ND	Fixation set
M955-ND	Set for changing mechanism screwes AM
M956-ND	Sliding waste pipe holder for WC systems
M959-ND	Set for exchange of inlet fill valve
MN0091-ND	Frame sleeve for WC systems
MN0092C-ND	Frame for WC system sleeve
MN0115-ND	Pipe with O-ring for WC systems
MN0536-ND	Service opening cover for AM118, AM119
MN0537A-ND	AM118, AM119 – mechanism

File Name	Size	Action
AM118/850 Sádromodul - CAD drawing.dwg	895.93 kB	Download
AM118/850 Sádromodul - CAD drawing.dxf	2.68 MB	Download
AM118/850 Sádromodul - Installation instructions.pdf	9.66 MB	Download
AM118/850 Sádromodul - Certificate.pdf	278.67 kB	Download
AM118/850 Sádromodul - Declaration of performance.pdf	215.76 kB	Download
AM118/850 Sádromodul - Service Instructions for Alca Concealed Cistern.pdf	8.65 MB	Download

	Product code	EAN	Technical sheet
	AM118/850	8595580559830