Pre-wall installation system for dry build up (plasterboard)

AM1101/1200 Sádromodul Slim

Product details

Water connection from the back or top via mounting holes	G1/2 "
Functional range of water pressure	0,05 – 1,6 MPa
Recommended range of water pressure	0,3 – 0,5 MPa
Factory setting of large flush	6 l
Factory setting of small flush	3 l
Hygienic reserve	3 l
Water volume in the cistern	9 l
Load test	400 kg

For wall-hung WC
For installing in front of a support wall or into a plasterboard construction, installation depth is only 84 mm
For floor thickness 0–100 mm
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

Visible marks for both leveling and the centerline
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Dual flush independently adjustable with hygienic reserve
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear/top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Installation depth adjustable from 20–60 mm
Installation depth 84 mm
Adjustable telescopic feet, range 0–100 mm
Frame material: powder-coated metal

Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
Fixation set: screw Ø8×60 – 8 pcs, dowel Ø12 – 8 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Waste elbow SLIM HT 90/90/110
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable

M0005-ND	Water supply ring A100
M0021-ND	Inlet sealing (WC systems)
M0023-ND	Wrapping seal 45×58×25 (WC systems)
M0028-ND	Coupler sealing (WC systems)
M0080-ND	Sleeve cover for WC systems
M0243-ND	Nut for angle valve bracket
M903-ND	Threaded rods + accessories
M916-ND	Fixation set
M958-ND	Cover with mechanism for WC systems Slim
M961-ND	Set for exchange of inlet fill valve - Slim
MN0082-ND	Spacer for WC cistern Slim
MN0091-ND	Frame sleeve for WC systems
MN0092C-ND	Frame for WC system sleeve
MN0116-ND	Pipe with O-ring for WC systems Slim
MS0018C-ND	Fill valve bracket for WC systems Slim
MS0025-ND	Waste pipe holder for WC systems - SLIM
MS0028-ND	Elbow Slim, bottom
MS0031-ND	Reduction SLIM
N0150-ND	Spacer for inlet fill valve – Slim
P165-ND	Angle valve SCHELL with bracket and nut

File Name	Size	Action
AM1101/1200 Sádromodul Slim - CAD drawing.dwg	368.78 kB	Download
AM1101/1200 Sádromodul Slim - CAD drawing.dxf	1.21 MB	Download
AM1101/1200 Sádromodul Slim - Installation instructions.pdf	9.26 MB	Download
AM1101/1200 Sádromodul Slim - Certificate.pdf	303.93 kB	Download
AM1101/1200 Sádromodul Slim - Declaration of performance.pdf	214.36 kB	Download
AM1101/1200 Sádromodul Slim - Service Instructions for Alca Concealed Cistern.pdf	8.65 MB	Download

	Product code	EAN	Technical sheet
	AM1101/1200	8595580551384

Installation AM101