Product details
Water connection from the back or top via mounting holes | G1/2 " |
Functional range of water pressure | 0,05 – 1,6 MPa |
Recommended range of water pressure | 0,3 – 0,5 MPa |
Big flush | 6 – 9 l |
Small flush | 2,5 – 3,5 l |
Factory setting of large flush | 6 l |
Factory setting of small flush | 3 l |
Hygienic reserve | 3 l |
Water volume in the cistern | 9 l |
Load test | 400 kg |
- For wall-hung WC
- For mounting in front of a support wall or in to a plasterboard construction
- For floor thickness 0–200 mm
- For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm
Application
- Dispenser for WC cistern tablets included
- Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
- Special feet allow oblique and longitudinal anchoring to the floor
- Visible marks for both leveling and the centerline
- Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
- Angle valve with the ability to connect to the Mepla piping system
- The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
- The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
- The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
- Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
- Cistern hinges made of two-component material insulate the transmission of vibrations from buildings
- Possibility of tilting the cistern for easy installation in wooden construction buildings or mobile cells
- Dual flush independently adjustable with hygienic reserve
- Suitable for installation of remote or sensor flushing
- Compatible with all ALCA flush plates
- Maintenance work without using any tools
- Water supply from the rear/top
- The cistern is made of one piece, thus ensuring 100% impermeability
- The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
- Massive heel of anchor feet
- Installation depth adjustable from 20–95 mm
- Installation depth 125 mm
- Frame material: powder-coated metal
Specifications
-
Norms
EN 14124, EN 14055
Quantity (package) | 1 pc |
Quantity (pallet) | 20 pcs |
Dimensions (piece) | 1130×145×520 mm |
Dimensions (package) | 1130×520×145 mm |
Weight (piece) | 14,707 kg |
Weight (package) | 14,707 kg |
Weight (pallet) | 314,14 kg |
- Cistern with fill and flush valve
- Self-supporting frame
- Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
- Fixation set: screw Ø8×60 – 6 pcs, anchor Ø12 – 6 pcs
- Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
- Elbow waste connector HT 90/90 polyethylene, PE-HD
- Waste reduction HT 90/100 polyethylene, PE-HD
- Inlet seal, PP outlet, wrapping seal
- Drainage seal, PP connector, connector seal
- End-caps set for protecting the connecting holes during installation of the system
- The 2 piece cover of the service opening is simply adjustable
- Set for inserting toilet tablets
Scope of supply
MN0867-ND | Inner plate for WC tablet dispenser |
P176-ND | Tablet ejector and insert - set |