Pre-wall installation system for dry build up (plasterboard) – for people with reduced mobility

AM101/1300H Sádromodul

Product details

Water connection from the back or top via mounting holes	G1/2 "
Functional range of water pressure	0,05 – 1,6 MPa
Recommended range of water pressure	0,3 – 0,5 MPa
Big flush	6 – 9 l
Small flush	2,5 – 3,5 l
Factory setting of large flush	6 l
Factory setting of small flush	3 l
Hygienic reserve	3 l
Water volume in the cistern	9 l
Load test for the installation of wall hung WC pans	400 kg
Load test for installing handrails	200 kg

For wall-hung WC
For mounting in front of a support wall or in to a plasterboard construction – for people with reduced mobility
For use with remote or sensor flushing
To mount supporting handrails
For floor thickness 0–200 mm
For installation of wall-hung WC pans with a connecting pitch of 180 mm or 230 mm

Dispenser for WC cistern tablets included
Frame for hanging wall-hung WC with boards for installation of handles for people with reduced mobility
Adjustable anchor feet and a spring-lock system, with a range of 0–200 mm
Visible marks for both leveling and the centerline
Sliding rail holder for the waste connector can be set to eight positions between 0–93 mm
Angle valve with the ability to connect to the Mepla piping system
The frame allows the anchoring to a separate sufficiently strong plasterboard partition, in front of the bearing wall
The installed module is covered with a plasterboard panel and there is no need for any additional fixing or anchoring elements
The construction of polystyrene insulation prevents condensation forming on the surface of the tank and dampens the vibrations from the tank into the building structure
Prepared for connecting a bracket with a DG 1/2” conversion for bidet seats and sprays
Dual flush independently adjustable with hygienic reserve
Suitable for installation of remote or sensor flushing
Compatible with all ALCA flush plates
Maintenance work without using any tools
Water supply from the rear/top
The cistern is made of one piece, thus ensuring 100% impermeability
The service opening cover simplifies assembly and prevents the penetration of moisture and impurities
Installation depth adjustable from 20–95 mm
Installation depth 125 mm
Frame material: powder-coated metal

Cistern with fill and flush valve
Self-supporting frame
Fittings 1/2" water connection with the integrated angle valve Schell 1/2–3/8"
Flushing mechanism screw 2 pcs
Fixation set: screw Ø8×60 – 4 pcs, dowel Ø12 – 4 pcs
Fixation material for fixing the WC pan: threaded rod M12 – 2 pcs, washers – 4 pcs , cover – 2 pcs, nut – 2 pcs, thread protector – 2 pcs
Elbow waste connector HT 90/110 polyethylene, PE-HD
Inlet seal, PP outlet, wrapping seal
Drainage seal, PP connector, connector seal
End-caps set for protecting the connecting holes during installation of the system
The 2 piece cover of the service opening is simply adjustable
Set for inserting toilet tablets

M0005-ND	Water supply ring A100
M0043B-ND	Inner board for WC systems
M916-ND	Fixation set
M954-ND	Mechanism complete for WC systems
M956-ND	Sliding waste pipe holder for WC systems
P175-ND	WC cistern hinges – complete 2 pcs

File Name	Size	Action
AM101/1300H Sádromodul - CAD drawing.dwg	1.1 MB	Download
AM101/1300H Sádromodul - CAD drawing.dxf	3.25 MB	Download
AM101/1300H Sádromodul - Installation instructions.pdf	6.27 MB	Download
AM101/1300H Sádromodul - Declaration of performance.pdf	214.1 kB	Download
AM101/1300H Sádromodul - Service Instructions for Alca Concealed Cistern.pdf	8.65 MB	Download

	Product code	EAN	Technical sheet
	AM101/1300H	8595580553920

Installation AM101