Shower drain with an edge for perforated grids and adjustable vertical flange to the wall

APZ4 Flexible

Product details

Odour trap	50 mm
Flow rate	60 – 68,8 l/min
Resistance of odour trap against the pressure	982 Pa
Waste pipe diameter	50 mm
Minimum thickness of concrete	85 mm
Total installation height	100 – 158 mm
Movable flange range	10 – 15 mm
Load class K3	300 kg

Linear drain from stainless steel (hardened by pickling, passivation and electrochemical polishing)
Adjustable vertical insulating collar for tiles with a thickness of 6–12 mm
Installation height from 85 mm
Adjustable height
Trap firmly connected to the drain – 100% waterproofing
Self-adhesive tape for quality waterproofing
Mechanically cleanable trap up to the waste pipe
The collar and trap are protected by foil, and the channel itself by a polystyrene insert
The high flow rate is achieved due to the double compartment trap system
Facilitates the inclination of the floor
Better and safer transition of the insulation from the floor to the wall
Possibility to buy a combined odour trap
25 years guarantee
Shower drain material: stainless steel 2 mm, AISI 304, DIN 1.4301
Trap material: polypropylene

The shower drain is assembled with the odour trap
Anchoring set: screw Ø6×50 – 2 pcs, dowel Ø10 – 2 pcs, screw Ø4.2×38 – 3 pcs, dowel Ø8 – 3 pcs
Self-adhesive waterproofing tape
Protective foil covering for the drain edges and odour trap
Protective film for trap inlet
Installation trough cover - polystyrene

File Name	Size	Action
APZ4 Flexible - CAD drawing.dwg	324.21 kB	Download
APZ4 Flexible - CAD drawing.dxf	910.07 kB	Download
APZ4 Flexible - Installation instructions.pdf	1.46 MB	Download
APZ4 Flexible - Certificate.pdf	334.96 kB	Download
APZ4 Flexible - Declaration of conformity.pdf	190.67 kB	Download